检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]广东石油化工学院化学与生命科学学院,广东茂名525000 [2]广东润丰石化有限公司,广东茂名525000
出 处:《应用化工》2012年第5期788-790,793,共4页Applied Chemical Industry
基 金:广东省产学研项目(2010B090400242)
摘 要:采用C5单烯烃馏分对精C5石油树脂进行改性,研究了C5单烯烃馏分的加入方式、加入量、反应时间、聚合温度、催化剂以及溶剂用量等工艺参数对产品性能的影响。结果表明,在精C5质量浓度为68%~70%、反应时间1.5 h、聚合温度为60~70℃、催化剂的质量分数为1.5%条件下,改性后精C5石油树脂与原树脂相比,在保持较高软化点的基础上,还具有较窄的相对分子质量分布和较低的熔融粘度等优点,明显提高了树脂的质量。A modified method of C5 petroleum resin to the fraction of C5 mono olefine.The technical parameters factors affecting on product performance including different feeding method and different amounts of the fraction of C5 mono olefine,different reaction time,different polymerization temperature,different catalysts and different solvents.The best result was obtained at 60 70 ℃,68% 70% concentration of refined C5 in the presence of 1.5% of catalyst for 1.5 h.Under the optimized conditions,the modified C5 petroleum resin not only maintain a high softening point in the foundation,but also with a narrow molecular weight distribution and lower melt viscosity which significantly improved the quality of the resin compared with the original resin.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222