对乙酰氨基酚在分子印迹膜修饰玻碳电极上的电化学行为及测定  

Electrochemical Behavior and Determination of Paracetamol at Molecular Imprinted Film Modified Glassy Carbon Electrode

作　　者：周清[1] 刘岚[2] 翟海云[1] 朱明芳[1] 张珍英[1] 

机构地区：[1]广东药学院药科学院,广东广州510006 [2]中山大学化学与化学工程学院,广东广州510275

出　　处：《分析测试学报》2012年第5期589-592,共4页Journal of Instrumental Analysis

基　　金：国家自然科学基金项目资助(21005021);广东省科技计划项目资助(2009198)

摘　　要：以对乙酰氨基酚(PCT)为模板分子,甲基丙烯酸为功能单体,采用光引发原位聚合法在玻碳电极(GCE)表面聚合成膜,以甲醇-甲酸将模板分子洗脱,制得对乙酰氨基酚分子印迹膜修饰电极(MIP-GCE),建立了该电极直接测定PCT的分析方法。结果表明,该传感器具有较高的选择性和灵敏度,PCT浓度在5.0×10-5～1.0×10-3mol.L-1范围内与其峰电流呈良好的线性关系,检出限为1.4×10-6mol.L-1。应用该法测定药物中PCT的含量,在干扰物质共存情况下的回收率为96%～105%。Using paracetamol（PCT） as template and methylacrylic acid as functional monomer,a molecular imprinted polymer film was synthesized on the surface of glassy carbon electrode（GCE） through in-situ polymerization by UV irradiation.After the template was removed with methanol and formic acid mixture solution,a paracetamol imprinted polymer film modified glassy carbon electrode（MIP-GCE） was prepared,and a method for the determination of PCT was developed with MIP-GCE.The sensor exhibited a good selectivity and sensitivity.The calibration curve was linear in the range of 5.0×10-5-1.0×10-3 mol·L-1 with a detection limit of 1.4×10-6 mol·L-1.The method was applied in the determination of PCT in drugs,with recoveries of 96%-105%.

关 键 词：对乙酰氨基酚 分子印迹膜 玻碳电极 电化学 原位聚合 光引发 

分 类 号：O657.1[理学—分析化学] TQ460.72[理学—化学]