接枝架桥剂配比对PP/a-PA66原位成纤复合材料形态结构和力学性能的影响  

Influence of Grafting and Bridging Agent Ratio on Morphological Structure and Mechanical Properties of In-Situ Microfibrillar Composites of Active PA66 with PP

作　　者：程龄贺[1] 李贵勋[1] 管众[2] 王经武[1] 

机构地区：[1]郑州大学材料科学与工程学院,河南郑州450052 [2]北京化工大学材料科学与工程学院,北京100029

出　　处：《高分子材料科学与工程》2012年第6期89-92,97,共5页Polymer Materials Science & Engineering

摘　　要：用反应性单体与助反应单体不同配比(C/R)制得的特殊结构的反应性增容剂(SCRC)与尼龙66(PA66)反应性共混,制得活性PA66(a-PA66),再将聚丙烯(PP)与a-PA66原位成纤复合,即采用"后期增容"技术,制得了一系列PP/a-PA66原位成纤复合材料,对其形态结构及力学性能进行了表征。结果表明,制SCRC时C/R过小,如2/8时,复合材料中PA66形成较均匀的微纤,但微纤与PP界面结合弱,综合力学性能不好;C/R过大,如6/4时,复合材料中PA66难以成纤,界面结合也弱,综合力学性能也不好;C/R为4/6时,复合材料中微纤的异形化程度最大,构筑成结合强的适度柔性界面,综合力学性能最佳,缺口冲击强度(NIIS)、拉伸屈服应力(TYS)、弯曲模量(FM)分别为原料PP的1.41倍、0.99倍、1.22倍。In-situ microfibrillar composites（PP/a-PA66） of active polyamide66（a-PA66） with polypropylene（PP） were prepared by using a ＂post-compatibilization＂ technique in the presence of reactive compatibilizer of special construction（SCRC） with different composition,which were synthesized starting from a series ratio of reactive monomer to assisted monomer（C/R）.The morphological structure and mechanical properties were studied.The results show that when C/R is too small or large,for example,2/8 or 6/4,the PP/a-PA66 composite has the more uniform microfibrils or can hardly form microfibrils,respectively,and they all have weaker adhesion of the interface and worse mechanical properties;PP/a-PA66 composite prepared by C/R of 4/6 has the most profiled microfibrils,and a structure characteristic of stronger adhesion and moderate flexibility of the interface. The composite has notched Izod impact strength,flexural modulus,and tensile yield stress of 1.41,1.22,and 0.99 times as much as those of the neat PP,respectively.

关 键 词：聚丙烯 尼龙66 原位成纤 形态结构 力学性能 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]