核电主管道用钢316LN高温变形性能研究  

Research on Deformation Property of 316LN Nuclear Main Pipe Steel at Elevated Temperature

作　　者：潘品李[1] 钟约先[1] 马庆贤[1] 袁朝龙[1] 朱思阳[1] 

机构地区：[1]清华大学先进成形制造教育部重点实验室,北京100084

出　　处：《中国机械工程》2012年第11期1354-1359,共6页China Mechanical Engineering

基　　金："十一五"国家科技支撑计划资助项目(2007BAF02B02;2007BAF02B07)

摘　　要：通过热力学模拟实验,研究了316LN钢在900～1200℃、应变速率为0.01～1s-1变形条件下的高温变形性能,得到了其在大型锻造件生产条件下的流动应力曲线。通过对实验数据进行多元线性拟合,建立了316LN钢的动态再结晶模型。通过变形试样淬火后显微组织的研究分析,验证了所建立模型的正确性。比较了动态再结晶对电渣重熔钢锭和真空浇铸钢锭晶粒细化效果的差异,从而初步确定了316LN钢合理的锻造工艺区间。Based on the thermodynamics research,which was conducted in the temperature range 900~1200℃ and the strain rate 0.01~1s-1,the flow stress curves of 316LN steel under the common production condition of heavy forging was investigated.Also,by multiple linear regression on the experimental data,a dynamic recrystallization model of 316LN was established.Then the microstructure of the thermal simulation samples after quenching was studied,which shows the validity of the model.The differences of grain refinement by dynamic recrystallization between the steels by electroslag remelting and vacuum casting were compared,then the optimized range of forging parameters for 316LN was suggested.

关 键 词：316LN钢 主管道 热变形 动态再结晶 

分 类 号：TG316[金属学及工艺—金属压力加工]