双馈异步发电机通风冷却综合计算  

Comprehensive calculation on ventilation and cooling of doubly-fed induction generator

作　　者：张志强[1] 戈宝军[1] 吕艳玲[1] 陶大军[1] 

机构地区：[1]哈尔滨理工大学电气与电子工程学院,黑龙江哈尔滨150080

出　　处：《电机与控制学报》2012年第4期36-42,共7页Electric Machines and Control

基　　金：国家科技支撑计划项目(2008BAF34B04)

摘　　要：针对具有轴径混合通风结构双馈异步发电机的通风发热问题,根据其通风系统的结构特点,建立集总参数的通风数学模型。通过此模型对电机内各风道的通风流量分布进行计算,并进一步分析转速及径向风道结构尺寸等因素对流量分布的影响。将通风计算结果作为边界条件,采用有限单元法对电机转子的温度场进行计算。计算结果表明,各径向风道的空气流量会随转速的升高而增加,各径向风道的流量分布可通过改变各风道的宽度来进行优化。集总参数的通风模型可有效用于电机通风的优化设计。In order to research the ventilation and heating problem for doubly-fed induction generator with axial and radial ventilation cooling system, a lump parameter mathematical model for ventilation was established, according to characteristics of fluid-flow of the electrical machine. The model was used to calculate the volume flow rate in each ventilation duct of the generator. Meanwhile, effects of rotor speed and wide of radial ventilation duct upon volume flow rate were also studied. Finally, results of ventilation calculation were used as boundary condition for rotor temperature field study by finite element method. The results show that volume flow rate of each radial ventilation duct increase with the increase of rotor speed. Volume flow rate distributions can be optimized by changing the width of each radial ventilation duct. Lump parameter model of ventilation is an effective mean for optimization design for electrical machine ventilation systems.

关 键 词：径向通风 通风计算 温度场 异步发电机 

分 类 号：TM311[电气工程—电机]