液晶显示模块振动分析与减振加固方案  

LCD module’s vibration analysis and damping reinforcement program

作　　者：单正叶[1,2,3] 陈永梅[3] 陈春[1,2,3] 

机构地区：[1]特种显示国家工程实验室,安徽芜湖241000 [2]安徽省现代显示技术重点实验室,安徽芜湖241000 [3]安徽师范大学物理与电子信息学院,安徽芜湖241000

出　　处：《电子设计工程》2012年第11期139-143,共5页Electronic Design Engineering

基　　金：特种显示国家工程实验室课题;省部共建现代显示技术国家重点实验室(培育基地)开放课题资助(ZHD-2011020)

摘　　要：机械振动是大尺寸加固型军用液晶显示模块损坏的重要原因,为了提高加固型液晶模块的质量,需要在强振动情况下,对液晶模块的受力、能量传递和分布进行分析,本文中首先根据液晶模块的结构,采用了由4块平板建构成的盒式结构模型,然后通过能量强度和能量的传递等计算,研究大尺寸加固型军用液晶模块的振动。通过上述分析,可以得出机械振动能量的主要分布、共振峰的位置等,结果表明在垂直于耦合边缘的方向上受力最强,在此基础上提出了一套可行的解决方案。文中的研究结果为进一步改进液晶屏的质量,提供了理论基础。Mechanical vibration is an important cause of the large-sized rugged military LCD module for damage, in order to improve the quality of the rugged LCD, we need to analyze the LCD module＇s force ,energy transmission and distribution in the strong vibration case, in this study ,firstly ,according to the structure of the LCD module , we built up a box-type by 4 plates, through energy strength and transmission, we studied the vibration of the large size rugged military LCD module. Through the above analysis, we knew the mechanical vibration energy mainly distribution and the location of the formants, the results showed that the force in the direction perpendicular to the coupling edge was strongest, and on this basis, we proposed a set of feasible solutions .This study results provided a theoretical basis for further improvements in the quality of the LCD screen.

关 键 词：液晶显示模块 振动 盒式结构 能量传输 

分 类 号：TN141.9[电子电信—物理电子学]