KH-570对硅丙核/壳乳液合成及性能影响的研究  

Study on influences of KH-570 on synthesis and properties of silicone-acrylate emulsion with core-shell structure

作　　者：鲁圣军[1,2] 甘华华[1,2] 段芳勇[1,2] 于杰[1] 

机构地区：[1]国家复合改性聚合物材料工程技术研究中心,贵州贵阳550014 [2]贵州大学材料科学与冶金工程学院,贵州贵阳550003

出　　处：《中国胶粘剂》2012年第5期17-20,共4页China Adhesives

基　　金：贵州省工业攻关项目(黔科合GY字[2009]3016)

摘　　要：以甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)和丙烯腈(AN)为主要原料,γ-(甲基丙烯酰氧基)丙基三甲氧基硅烷(KH-570)为改性剂,采用半连续种子乳液二阶段聚合法制备出一种核/壳结构型硅丙乳液。研究结果表明:KH-570含量对胶膜吸水率影响较小;胶膜力学性能及其保持率随KH-570含量增加而增大;当w(KH-570)=5%(相对于单体总质量而言)时,乳液及其胶膜的综合性能相对最好,其吸水率、拉伸强度和断裂伸长率分别为6.92%、13.37 MPa和43.98%,吸水48 h后拉伸强度和断裂伸长率分别为12.01 MPa和40.02%,吸水48 h后拉伸强度和断裂伸长率的保持率分别为89.83%和91.41%。With methyl methacrylate（MMA）,butyl acrylate（BA） and acrylonitrile（AN） as main raw materials,KH-570 as modifier,a silicone-acrylate emulsion with core-shell structure was prepared by two stages semi-continuous seed-emulsion polymerization.The research results showed that the influences of KH-570 contents on water absorption of films were less.The mechanical properties and their retentions of films were increased with increasing KH-570 contents.The emulsion and its film had the reversely best combination property because the water absorption,tensile strength and elongation at break were 6.92%,13.37 MPa and 43.98% respectively,and the retentions of tensile strength（12.01 MPa） and elongation at break（40.02%） after water-absorption for 48 h were 89.83% and 91.41% respectively when mass fraction of KH-570 was 5% in total monomers.

关 键 词：核/壳结构 硅丙乳液 力学性能 保持率 

分 类 号：TQ331.47[化学工程—橡胶工业]