温度传感器动态特性完全补偿方法研究与补偿电路设计  

Research on Complete Compensation to Dynamic Characteristic of Temperature Sensor and Design of Compensating Circuit

作　　者：鹿晓力[1] 路立平[1] 李奎[2] 鹿晓阳[3] 

机构地区：[1]郑州轻工业学院电气信息工程学院,河南郑州450002 [2]中油吉林化建工程股份有限公司,吉林吉林132021 [3]山东建筑大学工程力学研究所,山东济南250101

出　　处：《郑州大学学报（工学版）》2012年第3期65-67,71,共4页Journal of Zhengzhou University（Engineering Science）

基　　金：国家自然科学基金资助项目(60873080)

摘　　要：分析了温度传感器动态特性的一阶系统模型和二阶系统模型,指出了其中的二阶系统是非欠阻尼系统、两个系统的阶跃响应有相似性和共同点,进而提出可以将温度传感器动态模型统一简化为一阶系统模型.推导了能够将该一阶系统补偿成理想全通系统的补偿电路传递函数,设计了能实现该传递函数的有源滤波电路,给出了依温度传感器热时间常数设计电路元件参数的公式.指出信号转换电路输出电压与传感器体温度成线性比例关系、补偿电路和信号转换电路有足够宽的通频带,是用硬件实现温度传感器动态特性完全补偿的两个必要条件.The first-order system model and second-order system model for dynamic characteristic of temperature sensor are analysed. The second-order system is not a underdamping system and that there are similarity and intercommunity between the step responses of the two systems are pointed out, and then that the dynamic models of temperature sensor can be unified simplified as the first-order system model is put forward. The transfer function of compensating circuit which can make a first-order system to be compensated as a perfect all-pass system is derived. The active filter circuit which can realize the transfer function is designed, and the design formulas for calculating the circuit element parameters by thermal time constant of temperature sensor are given out. That the output voltage of signal conversion circuit are linear and proportionate to the sensor＇s temperature, and that compensating circuit and signal conversion circuit have sufficiently wide pass band, are pointed out as the two necessary conditions realizing complete compensation to dynamic characteristic of temperature sensor using hardwear.

关 键 词：温度传感器 动态测量 动态误差补偿 电路设计 

分 类 号：TH701[机械工程—仪器科学与技术]