Ausforming effects on anisotropy of mechanical properties in HSLA martensitic steel  

作　　者：LI ZhaoDong SUN XinJun CAO WenQuan YONG QiLong YANG ZhiGang DONG Han WENG YuQing 

机构地区：[1]Institute for Structural Materials,Central Iron and Steel Research Institute,Beijing 100081,China [2]Department of Materials Science and Engineering,Tsinghua University,Beijing 100084,China [3]The Chinese Society-for Metals,Beijing 100711,China

出　　处：《Science China(Technological Sciences)》2012年第7期1806-1813,共8页中国科学（技术科学英文版）

基　　金：supported by the National Basic Research Program of China("973" Program) (Grant No. 2010CB630805);the National Natural Science Foundation of China (Grant No. 51071089 and 51171087)

摘　　要：In order to clarify effects of prior pancaked austenitic structure on microstructure and mechanical properties of transformed martensite in ausformed steel,a super-thin pancaked austenite was processed by multi-pass rolling in a 0.03-2.6Mn0.06Nb-0.01Ti(wt%) low alloy steel.The evolution of prior pancaked austenite grain during multi-pass rolling was studied using Ni-30Fe model alloy.Related with the structure and texture in the prior super-thin pancaked austenite in Ni-30Fe alloy,the texture and anisotropy of mechanical properties of transformed martensite in the studied ausformed steel were focused on.There were mainly three kinds of rolling texture components in the super-thin pancaked austenite:Goss {110} 001,copper {112} 111 and brass {110} 112.They were further transformed into the weak {001} 110 and strong {112} 110,{111} 112 texture components in the martensitic structure.The orientation relationship(OR) of lath martensite transformation from pancaked austenite in the ausformed steel deviated larger from the exact Kurdjumov-Sachs(K-S) OR than in the case of equiaxed austenite without deformation.The tensile and yield strengths of the ausformed martensitic steel first decreased and then increased as the angle between tension direction and rolling direction increased.The main reason for the anisotropy of strength was considered as the texture component {112} 110 in martensite.However,the anisotropy of impact toughness was more complex and the main reasons for it are unknown.

关 键 词：pancaked austenite lath martensite TEXTURE strength and toughness HSLA steel 

分 类 号：TG142.24[一般工业技术—材料科学与工程] TU452[金属学及工艺—金属材料]