检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]上海交通大学电气工程系,上海200240 [2]上海电机学院电气工程系,上海200240
出 处:《电力系统保护与控制》2012年第12期62-65,71,共5页Power System Protection and Control
基 金:国家自然科学基金资助(60772006)~~
摘 要:传统傅里叶变换(FFT)主要应用于稳态谐波信号的分析,却难以得到时间局部信息,且对于突变信号或高频干扰信号的分析误差较大。小波变换(DWT)特别适合于不平稳信号和瞬变信号的分析,但对于稳态谐波的分析精度不及FFT。结合FFT和DWT中db20小波各自的优势,提出了一种基于FFT和db20小波变换的电力系统谐波联合分析策略。首先将电力系统谐波信号通过离散小波变换分解为低频部分和高频部分,再分别运用FFT和db20小波进行分析。算法经Matlab仿真,获得了预期结果,证明该策略在电力系统谐波分析中具有可行性和实用性。The traditional fast Fourier transform (FFT) is mainly applied to the analysis of the steady-state harmonic signals but is difficult to gain the time local information, and it shows big errors in the analysis of mutation signals or high frequency interference signals; the discrete wavelet transform (DWT) is particularly suitable for the non-stationary signals and transient signals, but shows lower accuracy than FFT in analyzing the steady-state harmonic signals. One analyzing strategy of power system harmonics based on FFT and DWT using db20 is presented considering advantages of both FFT and DWT. First of all, the power system harmonic signals are decomposed into low frequency part and high frequency part through the DWT, and then it is analyzed by FFT and db20 wavelet respectively. The strategy is proved effective and applicable by MATLAB simulation, which achieves the desired results. This work supported by National Natural Science Foundation of China (No. 60772006).
分 类 号:TM711[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.185