基于AQSSE方法的基础隔震结构损伤识别  

AQSSE method for damage identification of base-isolated structures

作　　者：穆腾飞[1] 周丽[1] 尹强[1] 

机构地区：[1]南京航空航天大学机械结构力学及控制国家重点实验室,南京210016

出　　处：《北京航空航天大学学报》2012年第5期625-629,共5页Journal of Beijing University of Aeronautics and Astronautics

基　　金：国家自然科学基金资助项目(11172128);国家自然科学基金国际(地区)合作与交流资助项目(61161120323);江苏省"六大人才高峰"资助项目(2010-JZ-004);江苏省普通高校研究生科研创新计划资助项目(CXLX11_0171)

摘　　要：提出自适应二次误差平方和(AQSSE,Adaptive Quadratic Sum-Squares Error)方法对基础隔震结构进行在线损伤识别实验研究.建立基础隔震结构实验模型,进行振动实验.实验过程中采用一套刚度元件装置在线模拟结构损伤,测量模型加速度响应和位移响应,基于测得的加速度信号和AQSSE方法在线识别基础隔震结构的参数和位移,并追踪参数的变化,从而识别结构损伤.研究结果表明:在两种典型地震波激励下,通过不同时刻的刚度突变模拟结构损伤,AQSSE方法得到的结构参数值与有限元分析结果一致,且识别得到的位移曲线与实验测量的位移曲线吻合良好,验证了AQSSE方法在基础隔震结构参数识别与损伤追踪中的有效性和准确性.A new data analysis method,referred to as the adaptive quadratic sum-squares error（AQSSE） method,has been investigated for the online identification of time-varying system parameters of structures.Experimental study was conducted and presented to verify the capability of the AQSSE approach for identifying and tracking the variations of structural parameters.A base-isolated building model was tested in the laboratory.A stiffness element device was proposed to simulate the abrupt reduction of model stiffness due to damage during the tests.Both El Centro and Kobe earthquake excitations were used to drive the test model.Different damage scenarios were simulated and tested.Then the AQSSE approach was used to track the variation of the stiffness during the test based on the measured acceleration response data.The tracking results for the stiffness variations correlate well with that of the referenced values obtained by finite element method.It is concluded that the AQSSE approach is effective and accurate in tracking the variations of structural parameters leading to the detection of structural damages,including the time,location and severity of the damage.

关 键 词：参数识别 损伤追踪 结构健康监测 自适应二次误差平方和方法 基础隔震结构 

分 类 号：N945.14[自然科学总论—系统科学] O327[理学—一般力学与力学基础]