长玻璃纤维增强聚丙烯复合材料的力学性能研究  

Mechanical Properties Study on Long Glass Fiber Reinforced PP Composite

作　　者：杨诗润[1,2] 梁珊[1,2] 罗筑[1,2] 吴晓宇[1,2] 于杰[2] 

机构地区：[1]贵州大学材料与冶金学院,贵州贵阳550003 [2]国家复合改性聚合物材料工程技术研究中心,贵州贵阳550014

出　　处：《塑料工业》2012年第6期37-40,共4页China Plastics Industry

基　　金：贵州省重点科技攻关项目(黔科合GY字[2009]3010)

摘　　要：采用熔体浸渍技术制备了长玻璃纤维母料(LGF/PP-g-MAH/PP)增强聚丙烯(PP)复合材料(LGF/PP)。通过双螺杆挤出机制备了同等配比的短玻纤增强聚丙烯(SGF/PP)复合材料。研究了LGF含量、环氧树脂(EP)和固化剂(2E4MZ)对LGF/PP复合材料的力学性能影响。结果表明:当LGF质量分数为35%～40%时,LGF/PP的综合力学性能最好,且明显优于同样组成的SGF/PP复合材料。EP和含固化剂(2E4MZ)的EP对LGF/PP复合材料的力学性能提高有一定的作用。SEM照片分析表明:EP的加入能改善玻纤与聚丙烯基体的界面粘接。In this paper, long glass fiber masterbateh （PP/PP-g-MAH/LGF） reinforced polypropylene composites （LGF/PP） were prepared via melt infiltration process, and also SGF/PP composites as the same ratio by twin-screw extruder was prepared. Influenee of the fiber content and epoxy resin （EP） and curing a- gent （2E4MZ） on mechanical properties of long fiber reinforced polypropylene was investigated. The com- prehensive mechanical properties of LGF/PP eomposites was the best when the LGF eontent was 35%-40%, and was also significantly better than SGF/PP composites. Epoxy resin and epoxy resin containing euring a- gent （2E4MZ） were propitious to the meehanieal properties of LGF/PP, and SEM showed that the interface bonding strength between the GF and PP had been improved with the addition epoxy resin.

关 键 词：聚丙烯 玻璃纤维 母料 环氧树脂 力学性能 界面粘接 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]