水表外壳上盖注塑模具设计  

Injection Mold Design for the Upper Cover of Water Meter

作　　者：赵亚穷[1] 王波[1] 冯跃战[1] 刘春太[1] 

机构地区：[1]郑州大学材料科学与工程学院,河南郑州450001

出　　处：《塑料工业》2012年第6期65-66,87,共3页China Plastics Industry

摘　　要：对水表外壳上盖塑件的结构和工艺性进行分析,从而确定一模一腔的注塑模具结构。采用Moldflow软件模拟分析了浇口位置、充填过程和翘曲变形等,为模具结构的优化提供依据。利用Proe4.0软件完成注塑模具的结构设计,可为类似塑件的注塑模具设计提供参考。Based on the analysis of structure and processing property for the upper cover of water meter, the structure of injection mold was decided to be single cavity with a parting surface. The gate location, fill- ing process and warpage were simulated and analyzed using Moldflow software to optimize mold structure. Af- ter that, the whole mold was designed by the use of Proe4.0 software. The work can provide reference for the mold design of similar plastic parts.

关 键 词：水表外壳上盖 注塑模具 CAE 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]