Sb变质Mg-10Al合金的组织与力学性能  

Microstructure and Mechanical Property of the Sb-modified Mg-10Al Alloy

作　　者：成满庆[1] 谢国印[1] 周斌[1] 樊强[1] 赵聃[1] 梁伟[1] 赵兴国[1] 

机构地区：[1]太原理工大学材料科学与工程学院,太原030024

出　　处：《材料导报》2012年第12期42-45,共4页Materials Reports

基　　金：国家自然科学基金(51175363);山西省青年科技研究基金(2008021033);太原市大学生创新创业专项基金(110148056)

摘　　要：研究了不同Sb含量的Mg-10Al合金的微观组织及在室温和150℃高温下的力学性能。结果表明,加入适量的Sb,Mg-10Al合金中生成了弥散分布的针状Mg3Sb2相,α-Mg初晶显著细化,抑制了网状共晶组织的形成。当Sb含量为0.5%(质量分数)时,组织细化效果最佳。随着Sb含量的增加,室温及高温下合金的抗拉强度、屈服强度和伸长率先升高后降低,均在Sb含量为0.5%(质量分数)时获得最佳综合性能。Mg-10Al-0.5Sb合金在150℃的抗拉强度为180MPa、伸长率为19%,比Mg-10Al合金分别提高了30%和90%。此外,在150℃条件下,含Sb合金仍保持了与其在室温下相当的强度,而未添加Sb的Mg-10Al合金的强度则明显下降。The microstructures and mechanical properties of Mg 10Al alloy containing different Sb content at room temperature and 150℃ were investigated. The results show that with an appropriate addition of ,Sb, lot of acicu lar Mg3 Sb2-phase was formed and dispersive distributed in the Mg 10Al alloy. Meanwhile, the network eutectic strut lure was suppressed with resulting in a refined microstructure with refined primary α-Mg grains and dispersive distri huled β- phase. The best mechanical properties including tensile strength, yield strength and elongation bolh al room and elevated temperatures were attained in the Mg 10A1 alloy containing 0. 5% SB. The tensile slrength and the dongallon of Mg-10Al-0.5Sh alloy at 150℃ were 180 MPa and 19G, which increase by 30% and 9024 compared to those of the Mg-10A1 alloy, respectively. Furthermore, the Sb modified Mg-10Al alloy maintained a higher strength at 150℃, equiwtlent to thai at room lemperature, Mille the strength of the urunodified Mg-10Al alloy decreased obviously.

关 键 词：Mg-10Al高铝镁合金 SB 微观组织 高温力学性能 

分 类 号：TG146[一般工业技术—材料科学与工程]