盒形塑件浇口位置的选择  

Selection of the Gate Location for the Box_Shaped Parts

作　　者：史安娜[1] 王晓方[1] 

机构地区：[1]沈阳工业学院,辽宁沈阳110045

出　　处：《模具工业》2000年第4期31-32,共2页Die & Mould Industry

摘　　要：介绍了盒形塑料浇口位置的选择原则 ,并用具体实例 ,对模具形式及工艺进行了比较 。The principle for selecting the gate location for the box_shaped plastic parts was introduced. A comparison was made on the mould form and the technological process through concrete examples, and it turned out that the pin_point gate form is relatively more fit for the moulding of the box_shaped plastic parts.

关 键 词：注射模 点浇口 侧浇口 盒形塑件 浇口位置 

分 类 号：TQ320.52[化学工程—合成树脂塑料工业]