苏丹3/7区高凝高黏原油油气水混输集输技术  

Application of Multiphase Gathering and Transportation Technique for High Pour-point and Viscosity Crude Oil in Sudan Block 3/7

作　　者：张国强 金永清 

机构地区：[1]中国石油集团工程设计有限责任公司北京分公司,北京100085

出　　处：《石油工程建设》2012年第3期31-34,7,共4页Petroleum Engineering Construction

基　　金：国家科技重大专项<大型油气田及煤层气开发>的子项目;课题编号:2008ZX05058

摘　　要：苏丹3/7区油田原油属于高凝高黏原油,由于油田集输面积大,当地安全形势严峻,给油田安全集输带来严峻的挑战。文章结合工程实际,通过对混输与分输流程的比较,确定了3/7区采用油气混输技术;通过对混输泵的比较,确定采用单螺杆泵。文章最后根据现场应用情况,对混输工艺进行了理论校核,并与实际运行数据进行了对比,理论与实践均证明,油气混输技术适用于苏丹3/7区高凝高黏油田。The crude oil produced from Sudan Block 3/7 is a kind of high pour-point and viscosity crude oil.The large area for oil gathering and transportation and the local serious security situation bring serious challenges to the safe gathering and transportation in the oilfield.Combining with engineering practice and through comparing the techniques of multiphase transportation and separate transportation,this paper determines to apply oil-gas multiphase transportation technique for Sudan Block 3/7;through comparing various multiphase pumps,it determines to use single screw pump;and based on field application practice,it conducts theoretical checking for the multiphase transportation process and makes comparison with practical operation data.Both the theory and the practice prove that the oil-gas multiphase transportation technique is suitable for the high pour-point and viscosity crude oil at Sudan Block 3/7 Oilfield.

关 键 词：高凝高黏原油 集输技术 混输技术 

分 类 号：TE866[石油与天然气工程—油气储运工程]