纳米陶瓷结合剂粉体的网络凝胶法制备与表征  

Preparation and characterization of nano-vitrified bond powder prepared by polyaerylamide gel method

作　　者：赵玉成[1] 王明智[1] 张贝贝[1] 

机构地区：[1]燕山大学亚稳材料制备技术与科学国家重点实验室,秦皇岛066004

出　　处：《金刚石与磨料磨具工程》2012年第3期55-58,73,共5页Diamond & Abrasives Engineering

基　　金：河北省自然科学基金资助项目(项目编号:E2010001177);河北省自然科学基金资助项目(项目编号:E2009000367)

摘　　要：采用高分子网络凝胶法(P-G法)制备了用于超精磨削用金刚石砂轮陶瓷结合剂组分。采用XRD、DSC、TEM等分析测试手段对纳米粉体的颗粒形貌、粒度大小和物相结构进行了表征。实验结果表明,应用P-G法制备单组分氧化物粉体(如Al2O3、MgO、SiO2、ZnO等),氧化物粉末易于确定煅烧温度,可以制备出物相单一、颗粒形态近球形、粒度分布窄的纳米粉体;但对于化学性质活泼的Na2O、K2O等氧化物的粉体则难以制备。The vitrified bond, usually used for making ultra precise grinding diamond wheel, was prepared by polyaerylamide gel（ P - G） method. The XRD, DSC, and TEM were used to characterize and analyze the grain morphology, grain size and phase constituent of nano-powders. The results showed that the calcining temperature for mono-oxide powder （such as Al2O3, MgO, SiO2, ZnO） could be conveniently chosen, and the powder with pure phase, spherical morphology and narrow grain size distribution could be prepared by P-G method. The result also showed that some active oxide powder such as Na20 and K2O could not be prepared by this method.

关 键 词：高分子网络凝胶法 陶瓷结合剂 超精磨削 纳米粉体 

分 类 号：TG74[金属学及工艺—刀具与模具] TQ164[化学工程—高温制品工业]