固井工艺对过套管电阻率测井影响的数值模拟  

Numerical Simulation of Impact of Cementing Technology on Resistivity Logging through Casing

作　　者：耿敏[1] 梁华庆[1] 尹洪东[1] 

机构地区：[1]中国石油大学(北京)地球物理与信息工程学院,北京102249

出　　处：《计算机测量与控制》2012年第6期1467-1469,共3页Computer Measurement &Control

基　　金：中国石油大学(北京)科研基金(FZG201003)

摘　　要：过套管电阻率测井响应信号十分微弱,增强测量信号幅度对提高仪器测量精度、改善视电阻率计算结果的精确性具有重要意义;建立全空间有限厚度纵向、径向阶跃地层模型,针对近地表段为低阻、中阻和高阻三种地层模型,在MATLAB7.0环境下数值模拟分别得出了近地表段有/无水泥环封固条件下,套管上一、二阶电位差的分布;分析上、下供电模式下电位差分布特点,总结了近地表段水泥环对测井响应的影响,给出了不同地层条件下近地表段水泥封固的建议。Because of the extremely weak signals it is important to enhance signals for improving the precision of instrument measurement and apparent resistivity calculation. Longitudinal and radial step--formation model of limited thickness in whole space is set up. Considering formation model with low, medium or high resistivity near--surface, first and second--order casing potential difference is separately obtained in MATLAB 7. 0 when there is or not cement sheath at near--surface formation. The influence of near--surface cement sheath on logging response is summarized based on the analysis for potential difference distribution feature of upper and lower power supply mode. Advices on near--surface cementing technology for different kinds of formation are proposed.

关 键 词：过套管电阻率测井 数值模拟 固井工艺 水泥环 

分 类 号：P631[天文地球—地质矿产勘探]