斜置式热管蒸汽发生器传热规律的数值模拟研究  

The Numerical Simulation Method of Heat Transfer in The Arrangement by Angle of Heat Pipe Steam Generator

作　　者：张明芝 仲崇宝[2] 

机构地区：[1]中国石油抚顺石化分公司,辽宁抚顺113008 [2]辽宁石油化工大学机械工程学院,辽宁抚顺113001

出　　处：《石油化工高等学校学报》2012年第3期67-69,共3页Journal of Petrochemical Universities

基　　金：辽宁省自然科学基金资助(20092182)

摘　　要：用FLUENT软件与对热管蒸汽发生器的温度场分布进行模拟,从结果中取两个截面作为研究对象。其次采用压力入口条件,对其进行计算,截取同样的两个截面进行对比。最后采用不同的速度入口条件,分别计算其在这两个截面上的温度场分布,通过以上计算可以得出蒸汽发生器传热规律。The numerical simulation calculation method and fluent software unifies, simulated the temperature distribution of the heat pipe steam generator, two sections were taken from the results for studing. Secondly, the pressure inlet conditions are calculated and intercept of the same two-- section to compare. Finally, different velocity inlet conditions were calculated in these two sections on the temperature distribution. Through the above calculations can be seen that the steam generator heat transfer temperature distribution.

关 键 词：蒸汽发生器 热管 数值模拟 

分 类 号：TE966[石油与天然气工程—石油机械设备]