检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]兰州理工大学有色金属合金及加工教育部重点实验室,甘肃兰州730050
出 处:《热加工工艺》2012年第14期67-71,共5页Hot Working Technology
基 金:甘肃省自然科学基金项目(3ZS042-B25-028)
摘 要:采用静态增重法测定了中频感应炉熔炼、金属型冷却制备的Fe3Al合金在700、850、1000℃的高温氧化行为,700、850℃时合金的氧化动力学曲线基本符合抛物线规律,1000℃的则不符合;合金在氧化过程中表现为完全抗氧化级。X射线衍射、扫描电镜和能谱分析表明,700℃×125h的氧化膜主要由FeAl2O4、Cr2O3和少量的Al2O3组成;850、1000℃时氧化膜分为两层,内层主要由FeAl2O4和Fe2O3组成,表层为Al2O3,在实验时间内Al2O3氧化膜没有完全覆盖内层氧化膜;随着氧化温度的升高,氧化时间的延长,合金表层的Al2O3氧化膜将由θ-Al2O3向α-Al2O3转变。The high temperature oxidation behavior of cast Fe3Al alloy prepared in a medium frequency induction furnace and solidified in a permanent mould at 700℃, 850℃ and 1000℃ was studied by still TGA method. The results show that the oxidation kinetics obey parabolic law at 700℃ and 850℃, but it is inconformity at 1000℃. Fe3Al alloy performance for completely antioxidant levels in the oxidation process. The oxide scales were examined by SEM, X-ray diffraction and EDS. The results show that the oxide scales at 700℃ consist of FeAl2O4, Cr2O3 and a little Al2O3, while at 850 ℃ and 1000℃. The oxide scales are composed of a loose Al2O3 top layer and internal oxide layer consisting of FeA1204 and Fe2O3, but the Al2O3 oxidation film has not completely covered the internal oxidation layer for 125 h. And the top layer changes from 0-Al2O3 into a-Al2O3 with the increase of oxidation temperature and time.
关 键 词:FE3AL 金属间化合物 高温氧化 氧化动力学 氧化膜
分 类 号:TG131[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222