检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李艳洁[1] 刘翼晨[1] 林剑辉[1] 徐泳[2]
机构地区:[1]北京林业大学工学院,北京100083 [2]中国农业大学理学院,北京100083
出 处:《农业机械学报》2012年第7期63-68,共6页Transactions of the Chinese Society for Agricultural Machinery
基 金:国家自然科学基金资助项目(30800665;11072260);中央高校基本科研业务费专项资金资助项目(YX2010-6;TD2011-26)
摘 要:在圆锥指数仪贯入沙土试验的基础上,建立了半圆柱形沙土料床的三维数值模型,利用离散元法对圆锥指数仪贯入沙土过程进行了模拟,讨论了圆锥指数的主要影响因素及其影响规律。研究结果表明:贯入圆锥的铅垂方向阻力、圆锥指数及半圆柱形料床侧壁的正压力均随着贯入深度的增加而增大,且形状窄、粒径大的料床圆锥指数明显大于形状宽、粒径小的料床;贯入后的大颗粒料床侧壁正压力明显大于小颗粒料床;当圆锥贯入速度大于0.2 m/s时,圆锥指数才明显增大,此时贯入过程已经对料床产生较强的冲击效应。最后,把贯入后的料床根据颗粒的位移划分为4个区域,可以直观地判断出贯入过程的影响范围,为实地测量土壤坚实度时取样点间距的选取提供了理论依据。Based on the experiments of the sandy soil penetration,a semi-cylindrical sandy soil bed in 3D was established,and the simulation with discrete element method for the penetration was investigated.According to the studies on the experiments and simulations,the analysis of influencing factors to the cone index of soil was discussed.And the result showed that the vertical resistance of the penetrometer,cone index and the normal force on the semi-cylindrical wall all increased as the increasing of the penetration depth.And the cone indexes of the narrow and big particle soil bed are much larger than the wide and small particle beds.Besides,the normal force on the semi-cylindrical wall of the big particle bed after penetration is larger than the small particle one.Only after the penetration velocity exceeded 0.2m/s would cone index increase obviously because of impact force from the penetrometer on the particle bed.Finally,according to the displacement of particles,the particle bed after penetration was divided into four zones,and the influencing area could be defined easily,which provided theoretical foundation for determination of distance between measurement points in situ test of soil compaction.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28