二维片状二钛酸钡颗粒的熔盐法合成  

Synthesis of 2D plate-like barium dititanate particle by molten salt method

作　　者：徐军[1] 冷浩博[1] 伍建华[1] 

机构地区：[1]武汉工程大学材料科学与工程学院,湖北武汉430074

出　　处：《武汉工程大学学报》2012年第7期37-40,共4页Journal of Wuhan Institute of Technology

基　　金：教育部留学回国人员科研启动基金;湖北省教育厅科学研究重点项目(D20101504)

摘　　要：以具有纤铁矿层状结构的钾锂钛氧化物为初始模板,通过原位拓扑反应制备出片状锐钛矿二氧化钛颗粒.以碳酸钡和片状二氧化钛为反应原料通过熔盐法制备了片状二钛酸钡颗粒.由于二氧化钛在氯化钠和氯化钾复合熔盐中的溶解速率大大低于碳酸钡,因而二氧化钛成为反应模板,反应产物二钛酸钡保留了二氧化钛的片状形貌.得到的片状二钛酸钡颗粒长20～50μm,宽10～20μm,厚约5μm.Plate-like titanium dioxide （anatase） particles were prepared by in situ topotactic transformation reaction with potassium lithium titanium oxide as the template. Barium dititanate platelike particles were synthesized in a mixed sodium chloride and potassium chloride molten salt at 840 ℃ for 5 h with barium carbonate and the plate-like titanium dioxide as precursors. As the dissolution rate of titanium dioxide is much lower than that of barium carbonate in the sodium chloride and potassium chloride molten salts, the plate-like titanium dioxide particles react as templates. The obtained barium dititanate particles retain the plate - like morphology of the titanium dioxide precursors, and are 20 -50 p,m in length, 10 -20 μm in width, and about 5 μm in thickness.

关 键 词：模板 熔盐法 铁电材料 二钛酸钡 

分 类 号：TM221[一般工业技术—材料科学与工程]