端面刷式密封性能分析  

Property Analysis of Face Brush Seal

作　　者：李双喜[1] 王为伟[1] 史金鑫[1] 蔡纪宁[1] 张秋翔[1] 

机构地区：[1]北京化工大学,北京100029

出　　处：《流体机械》2012年第6期45-50,32,共7页Fluid Machinery

基　　金：国家科技支撑计划项目"高参数泵机械密封装置关键技术研究与应用"(2011BAF09B05)

摘　　要：针对端面刷式密封的特点,采用多孔介质模型作为刷丝区的分析模型,采用Fluent软件对端面刷式密封泄漏流动进行了模拟,得出刷丝区承担着主要压力降,起到主要密封作用。模拟结果与试验值进行了对比,得到较为一致的趋势,且试验值均高于理论值。用仿真方法讨论了一些重要参数对端面刷式密封性能的影响,可供工程实际参考。Aiming at characteristics of face brush seal,porous medium model has been taken as the analysis model in the brush area.The leakage flow of face brush has been simulated making use of Fluent software.After analysis,the conclusion that the brush area is the main pressure-loaded drop area,and take the responsibility of seal.The simulation and experiment result has been compared.The consistence trend is obtained,and the experiment result is higher than theoretical value.The impact of important parameters on properties of the face brush seal is discussed by simulation method.The result can be consulted in the engineer practice.

关 键 词：刷式密封 性能分析 泄漏量 

分 类 号：TH136[机械工程—机械制造及自动化]