掺CeO2的B4C／Al复合材料性能的研究  

Study on the Properties of B4C/Al Composite Including CeO2

作　　者：牛国帅[1] 夏长清[1] 周飞[1] 曾凡浩[2] 李学雄[1] 

机构地区：[1]中南大学材料科学与工程学院,湖南长沙410083 [2]中南大学粉末冶金国家重点实验室,湖南长沙410083

出　　处：《中国材料科技与设备》2012年第3期17-19,共3页Chinese Materials Science Technology & Equipment

基　　金：总装备部预研基金项目（51312010311）

摘　　要：以稀土氧化物CeO2作为添加剂，原位生成CeB6颗粒作为第二相，增强B4C陶瓷预制体，然后以无压浸渗法制得B4C-CeB6／Al复合材料。本文首先研究了B4C-CeB6预制体的相组成和组织形貌，然后对BC-CeB6／Al复合材料的力争性能、相组成、组织形貌以及断裂机制进行了分析。结果表明：B4C-CeB6／Al复合材料的抗弯强度达到了410．16MPa，断裂韧性也有了显著改善，达到了6．95MPa·m^1/2，比常规热压烧结单一碳化硼陶瓷性能有明显提高，这主要是由于原位生成CeB6颗粒增强了B4C陶瓷的强度：同时黏结金属相起到增韧的作用．Making CeO2 as additive, B4 C--CeB6 ceramic were prepared by in--situ reaction. Then B4 C--CeB6/Al composites were prepared by pressureless infiltration. The article first studied the phase composition and microstructure of B4 C-CeB6 ceramic preform, and then analyzed the mechanical properties, phase composition, microstructure, and fracture mechanisms of B4C--CeB6/Al composite. The results showed that, the value of flexibility strength of B4 C--CeB6/Al composite reached 410. 16MPa, the value of fracture toughness was 6.95MPa · m1/2 , which gave B4 C--CeB6/Al composite a big advantage over routine hot--pressed sintered pure B4 C ceramic in both properties and preparation technics. And the advantagemainly resulted from both the improving of the properties of B4 Cceramicpreform by introducing CeB6 and the ductility of aluminum.

关 键 词：B4C—CeB6/Al复合材料 第二相 增韧 碳化硼陶瓷 

分 类 号：TB331[一般工业技术—材料科学与工程]