一种基于并行化方法的自适应光学闭环预测控制器  

A Novel Predictive Controller in the Adaptive Optics Control System Based on Parallelization Method

作　　者：史晓雨[1] 冯勇[1] 陈颖[1] 谭治英[2] 孙治[1] 李新阳[3] 

机构地区：[1]电子科技大学计算机科学与工程学院,四川成都611731 [2]中国科学院成都计算机应用研究所,四川成都610041 [3]中国科学院光电技术研究所自适应光学重点实验室,四川成都610209

出　　处：《光学学报》2012年第8期26-36,共11页Acta Optica Sinica

基　　金：国家自然科学基金(60978050;91118001);国家973项目(2011CB302402);四川省青年科技基金(09ZQ026-014)资助课题

摘　　要：自适应光学系统的性能受限于伺服系统的延迟误差和波前传感器的光电子噪声。提出了一种多模型单变量预测模型,该模型采用基于Levenberg-Marquardt学习算法的前馈型神经网络。利用计算机多核处理器,设计了一个具有并行处理能力的预测控制器,来实现对自适应光学闭环控制电压的预测,以消除延迟误差的影响。通过数值仿真实验,研究了预测控制器对控制电压和远场斯特雷尔比的影响,与未采用预测控制器的系统进行了比较,并对预测算法的并行性能进行了分析。实验结果表明,使用并行化方法的预测控制器可以有效缩短系统的预测时间,提高预测算法的加速比,与经典比例积分(PI)控制算法相比可以更有效地降低系统由于伺服延迟引起的误差,远场的斯特雷尔比有明显地提高。Performance of adaptive optics （AO） system is limited by the delay errors caused by the servo system and photoelectron noise at the wavefront sensor. A multi-model univariate prediction model is proposed, which is based on the two-layer back propagation neural network with Levenberg-Marquardt learning algorithm. Using the multi-core processors, a novel predictive controller with parallel processing capabilities is designed that is able to predict the control voltage in the closed-loop AO system and eliminate the delay errors. Through numerical simulation, the prediction performance and parallel efficiency are studied. The control voltages of the A0 system and the Strehl ratio are calculated and compared for the multi-model univariate prediction algorithm and proportional integral （PI） control algorithm. The results show that the residual error caused by servo delay in the system and Strehl ratio are improved effectively by using the predictive controller than by using the PI control algorithm. The prediction time is reduced by using multi-model univariate prediction algorithm.

关 键 词：大气光学 自适应光学 预测控制器 多模型单变量预测模型 并行化 多核 神经网络 

分 类 号：TP273.2[自动化与计算机技术—检测技术与自动化装置]