基于16通道自动巡检仪的设计与研究  

Design and Research of Automatic Inspection Instrument of 16 Channels

作　　者：孙丰[1] 王振宏[1] 马岩[1] 李伟龙[1] 杨建新[1] 

机构地区：[1]长春理工大学机电工程学院,吉林长春130022

出　　处：《机电元件》2012年第4期18-21,共4页Electromechanical Components

摘　　要：目前,我国许多工矿企业绝大多数的生产数据监测还都采用分散的模拟或数字仪表来进行计量与监测。为保证生产的顺利进行,值班工人必须24小时不断地来回巡视、记录这些仪表的数值。这种人工巡视、记录的管理方式不仅劳动量大,速度慢,而且由于二次人工巡视之间的时间间隔不可能很短,而且许多仪表没有超限自动声光报警装置,因此使故障不能迅速、及时地得以发现和处理。本设计就是根据工业生产自动化管理的实际需要而设计的,核心器件采用单片机,只要改变传感器及放大器的参数,利用单片机强大的数据处理能力将参数显示出来,就可以灵活地组成各种不同参数的自动巡检测量仪器。这种仪器应用范围广,适用于很多工业的生产现场。At present, the vast majority of the production data monitoring in many domestic enterprises still uses distributed analog or digital instruments for measurement and monitoring. In order to ensure the smooth production, workers on duty must be inspecting back and forth, and record these instrumentg numerical for 24 hours continuously This manual inspection, record management mode is not only a large amount of labor, slow speed, and as a result of the two manual patrol between time interval may be very short, but many instruments not overrun automatic alarm de- vice, so the fault can not be detected and treated quickly and timely. This design is based on the industrial produc- tion automation management of the actual needs of the design and the core device, using SCM, as long as the change in sensor and amplifier parameters, using single chip computer to the powerful data processing display, can flexibly composed of a variety of different parameters of the automatic inspection ratus has wide application range, is suitable for many industrial production site. ability of the parameter instrument. This appa-

关 键 词：自动化管理 单片机 传感器 自动巡检 

分 类 号：TN784[电子电信—电路与系统]