检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:史世凤[1] 范强[1] 贾崇林[1] 牛永吉[1]
出 处:《北京科技大学学报》2012年第8期908-914,共7页Journal of University of Science and Technology Beijing
摘 要:研究了合金成分和热处理制度对K648合金组织中α—Cr相析出形态和力学性能的影响,并通过Thermo-calc软件计算了K648合金平衡相析出规律.计算结果表明合金中的析出相主要为α—Cr、γ'相和M23C6碳化物.通过实际组织观察得出合金中α—Cr相的析出形态对Cr含量和热处理工艺制度极为敏感,具体表现为α—Cr相形态的多样性.力学性能测试进一步表明合金的室温拉伸性能、冲击性能均受α—Cr相形态和分布的影响,即合金性能表现出组织敏感性.The effects of element contents and heat treatment regimes on the precipitation morphology of α-Cr phase and the mechanical properties of K648 superalloy were systematically investigated by room-temperature tension and impact tests. The precipitation law of equilibrium phases in K648 superalloy was calculated by Thermo-Calc software. The calculated results show that the main equilibrium precipitation phases are α-Cr phase, γ^1 phase and M23 Cs carbide. Microstructure observations indicate that the precipitation morphology of α-Cr phase is sensitive to the Cr content and heat treatment regime, demonstrating its morphological variety. Mechanical property tests further testify that the room-temperature tensile properties and impact properties are significantly dependent on the morphology and distribution of α-Cr phase, meaning that the mechanical properties of the alloy have microstructure sensitivity.
分 类 号:TG146.15[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117