利用Windows失效恢复机制的网络冗余快速切换的实现  

Implementation of speed switch for network redundancy based on windows failure recovery mechanism

作　　者：许建平[1] 刘晓亮 张杨[3] 赵慧[3] 

机构地区：[1]海军装备研究院系统所,北京100073 [2]海军驻北京作战系统军事代表室,北京100036 [3]中国航天科工集团第二研究院706所,北京100854

出　　处：《计算机工程与设计》2012年第8期2976-2980,3063,共6页Computer Engineering and Design

摘　　要：为了保证网络服务的稳定性,提高网络冗余链路的切换速度,文中分析了Windows驱动程序接口规范中的失效恢复机制以及网络冗余链路切换过程中数据包丢失的原因。通过采用主动发送ARP广播和重发数据的方法提高网络链路冗余切换速度,获得了快速切换的效果。在实际应用中,使用这种方法能够将网络冗余链路的切换时间降低到4ms。To ensure the stability of network service and improve the switch speed of different backup paths, the fail recovery mechanism of windows network driver interface specification and the reasons for loosing of the data packet during the process of switching different backup paths are analyzed. The switch speed of the different backup paths is improved by initiative sending ARP packet and retransmitting data packet. Experiments shows that the time of switching different backup paths is reduced to 4ms.

关 键 词：网络冗余 小端口驱动 负载均衡和失效恢复 ARP协议 网络驱动程序接口规范 

分 类 号：TN913.8[电子电信—通信与信息系统]