基于LabVIEW的挖掘机串口参数监控系统设计  

Design of Serial Interface Data Monitoring System for Excavator Based on LabView

作　　者：王剑波 张军 司葵卯[2] 李金平[2] 殷鹏龙[1] 黄鸣辉 魏博观 

机构地区：[1]常林股份有限公司新产品研发所 [2]长安大学道路施工技术与装备教育部重点实验室

出　　处：《工程机械》2012年第8期1-5,111,共5页Construction Machinery and Equipment

基　　金：中央高校基本科研业务费专项资金资助项目(CHD2012JC088)

摘　　要：整机参数的在线监测对分析挖掘机状态以及调试样机具有现实意义。分析挖掘机控制系统的组成和参数传递规律,以GPS和控制器间的传递参数为采集目标,以LabVIEW为平台,构建挖掘机串口参数监控系统,并进行现场试验。试验结果表明,构建的挖掘机串口参数监控系统能正确解析通讯数据包,获取整机各项参数。It is realistic interest to use on-line monitoring over entire excavator's data to analyze its status and tune and test the sample machine. We have analyzed composition and data transfer laws of the excavator's control system so as to collect data transferred between GPS and the controller. Besides, we used LabVIEW as a platform to construct an serial interface data monitoring system for the excavator while car ring out an on-job test. Test results show that such a monitoring system can correctly explain the communication data package, thus getting items of data for the machine as a whole.

关 键 词：挖掘机 LABVIEW GPS 串口:监控 

分 类 号：TU621[建筑科学—建筑技术科学]