模块化低位顶升钢平台模架体系在福州世茂国际中心项目实施关键技术  

Application of Modularized Low-position Jacking Formwork System in Fuzhou Shimao International Financial Center Project

作　　者：吴延宏 许立艾 王开强 刘晓升 黄爽 刘志茂 

机构地区：[1]中建三局建设工程股份有限公司,湖北武汉430064

出　　处：《施工技术》2012年第8期7-11,共5页Construction Technology

基　　金：中建三局建设工程股份有限公司课题(CSCEC3B-2010-35)

摘　　要：在福州世茂国际中心项目中,模块化低位少支点整体顶升钢平台模架体系首次投入使用。首先介绍了福州世茂国际中心项目概况及模块化顶模设计的基本情况,此后重点介绍了该模架在使用中的关键工序;模架的安装流程及控制要求;模架顶升规划;模架在混凝土泵送、伸臂桁架施工等环节的应对措施;模架的垂直运输方案;模架的拆除。这些都为模块化顶模技术的推广和使用奠定了基础,为其施工技术内容的不断完善提供工程依托和实践积累。The modularized low-position jacking formwork system was put into use for the first time in the Fuzhou Shimao International Financial Center project. The Fuzhou Shimao International Financial Center project was firstly introduced as well as modularized low-position jacking formwork system. Then the key operational procedures of this formwork were presented in detail, including installation procedure and control requirement, the planning of formwork jacking process, measures to cope with concrete pumping and outstretched truss construction, vertical transportation and dismantlement. This project has laid a solid foundation for the wide application of modularized low-position jacking formwork system, and provided engineering experience to the improvement of this construction technique.

关 键 词：高层建筑 模块化 低位顶升模架体系 施工技术 

分 类 号：TU755.2[建筑科学—建筑技术科学]