模块化低位顶升钢平台模架体系中挂架设计与施工  

Design and Construction of the Rack System in Modularized Low-position Jacking Formwork System

作　　者：黄爽 吴延宏 王开强 刘志茂 刘晓升 

机构地区：[1]中建三局建设工程股份有限公司,湖北武汉430064

出　　处：《施工技术》2012年第8期12-16,共5页Construction Technology

基　　金：中建三局建设工程股份有限公司课题(CSCEC3B-2010-35)

摘　　要：模块化低位顶升钢平台模架体系是近几年出现的新型模架体系施工技术,主要为解决超高层建筑核心筒竖向结构施工而设计。以该模架体系在工程项目中的实际需求为出发点,介绍低位顶升钢平台模架体系中的挂架设计的总体思路和安装使用的关键控制点,为实现挂架体系的标准化、装配化提供依据和参考。Low-position jacking steel platform formwork system is a new formwork construction technique that appeared only in recent years. It is mainly designed for construction of the vertical core wall of tall buildings. Based on the practical application of this formwork system in engineering projects, this paper introduced the overall design concept of hanging rack in low-position jacking steel platform formwork system and the key control points during its installation. The work in this paper provided references to the standardization and assemblability of rack system.

关 键 词：高层建筑 低位顶升模架体系 挂架 结构设计 施工技术 

分 类 号：TU755.2[建筑科学—建筑技术科学]