SiPM阵列电子特性建模和三维测深仪前端电子学优化  

Model of electrical characteristics of SiPM array and optimization of front-end design for three-dimensional depth sounder

作　　者：聂瑞杰[1,2] 徐智勇[1] 张启衡[1] 王华闯[1] 程华[1,2] 

机构地区：[1]中国科学院光电技术研究所,四川成都610209 [2]中国科学院研究生院,北京100039

出　　处：《光学精密工程》2012年第8期1661-1668,共8页Optics and Precision Engineering

基　　金：中科院科技创新基金资助项目(No.A08K001)

摘　　要：从硅光电倍增管(SiPM)单个微元的微等离子体电子行为模型出发,分析了SiPM的电子特性,提出了SiPM前端电子学最优设计方案。阐述了SiPM的工作机理,给出了SiPM的电子行为模型,分析了SiPM应用于水下三维测深的优势。根据水下测深信号的回波特性,设计了高速、高带宽的前置放大器,并对前置放大器进行了交流分析和瞬态分析。结果表明,该前置放大电路在带宽内具有很高的增益平坦度,相位裕度大于60°,基本保证了信号的完整性,同时保持了激光脉冲的波形。分析和测试结果表明,该探测器和电路设计方案完全能够满足水下三维测深的需要。The electrical characteristics of Silicon Photomultipliers（SiPMs） were analyzed on the basis of the behavior model of a micro plasma electron in the SiPMs,and an optimum design scheme for the SiPM front was proposed.The working principles of SiPM arrays were introduced,the electrical behavior model of a SiPM was given,and the advantage of SiPM for the underwater three-dimensional depth sounder was discussed.Based on the echoing characteristics of the underwater depth sounder,a high speed,high bandwidth preamplifier was designed,and an alternating current analysis and a transient analysis were performed.Results show that the preamplifier circuit has much high gain flatness in the bandwidth and the phase margin is more than 60°,which ensures the integrity of signals and the waveforms of laser pulse signals.Analysis and test results indicate that the SiPM arrays and the circuit design can satisfy the requirement of underwater three-dimensional depth sounder,and can improve the target acquisition performance of the laser underwater imaging systems.

关 键 词：硅光电倍增管(SiPM) 微等离子体 电子行为模型 三维测深仪 前置放大电路 最优设计 

分 类 号：TN52[电子电信] P733.33[天文地球—物理海洋学]