嵌入钢壳的共形微带天线设计  

A Conformal Microstrip Antenna Embedded in Steel Shell

作　　者：王代华[1] 宋林丽[1] 苏尚恩 张志杰[1] 

机构地区：[1]中北大学仪器科学与动态测试教育部重点实验室,山西太原030051 [2]中兵光电科技股份有限公司,北京100176

出　　处：《中北大学学报（自然科学版）》2012年第4期462-465,共4页Journal of North University of China(Natural Science Edition)

基　　金：仪器科学与动态测试教育部重点实验室青年基金资助项目(2011YF003)

摘　　要：针对安装空间受限且需要与安装壳体共形的需求,设计了一种工作于2.4 GHz频段的圆环形微带贴片天线.利用Ansoft HFSS软件建立了天线及其安装壳体的模型,通过仿真分析确定了天线的外形尺寸以及加载电阻的阻值.仿真结果表明:辐射贴片的外形尺寸与天线的谐振频率密切相关,尺寸增大会使谐振频率明显下降;增大加载电阻的阻值可有效降低天线的谐振频率;嵌入钢壳后天线的谐振频率提高了4.2%.利用矢量网络分析仪对天线嵌入钢壳后的特性进行了实测,测试结果与仿真结果吻合良好.Considering the requirements of limited mounting space and conformal structure,an annular ring microstrip patch antenna working in 2.4 GHz band was proposed.The antenna and its mounting shell were modeled by using the software of Ansoft HFSS,and the key parameters,such as the patch sizes and the resistance of loading resistor,were optimized by simulation.The simulated results indicate that the patch sizes have a great influence on the resonant frequency of the antenna,as the sizes increased,the resonant frequency decreased obviously.It is also found that the resonant frequency can be decreased when increasing the resistance of the loading resistor,and the resonant frequency increased by about 4.2% as the antenna embedded in the steel shell.The antenna with the steel shell was measured by using a vector network analyzer,and the measured results show good agreements with the simulated ones.

关 键 词：微带天线 电阻加载 共形天线 钢壳影响 

分 类 号：TN823[电子电信—信息与通信工程]