检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]辽宁工程技术大学力学与工程学院,阜新123000
出 处:《工程地质学报》2012年第4期471-477,共7页Journal of Engineering Geology
基 金:国家自然基金面上项目(10972096)
摘 要:为了研究含弱面斜坡在强震作用下变形破坏规律,对含单一弱面的3组斜坡模型模拟地震作用下的变形破坏,并用数字散斑相关方法对实验结果进行处理,得到斜坡模型位移和应变。从实验结果可以发现:位移和应变变形均集中在弱面上,随着震动的持续,这种变形积累最终导致斜坡发生破坏;模型对比中可以发现,在斜坡体内弱面越深则斜坡稳定性越强,在斜坡体内弱面越长则斜坡稳定性越弱。分析模型最初在顶部出现裂缝和沿弱面发生滑动的原因。This paper examines the law of the deformation and failure of slopes associated with weak planes under earthquake effects. Experiments with a single three group weak surface slope model is carried out under simulatedearthquake deformation and failure in shaking table. The digital speckle correlation method is used to process the experimental results. The displacement and strain of model slope are obtained. From the experimental results, itcan be found that the displacement and strain are concentrated in the weak surface slope with the continuous vibration, eventually leading to the slope damage. It can be found from the experimental model comparisons that the deeper the weak surface in the slope body, the more stable the slope. The longer of the weak surface in the body, the less stable the slope. The test model first appeared fractures in the top, and then damaged along a weak surface, which is analyzed for the cause of the slope failure.
关 键 词:地震作用 斜坡 弱面 相似材料模拟 数字散斑相关方法(DSCM)
分 类 号:P642.22[天文地球—工程地质学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.46