低熔体流动速率高性能PBT复合材料制备工艺技术研究  

Study on the Preparation of PBT with Low Melt Flow Rate and High Performance

作　　者：达君[1] 唐勇[1] 杨克斌[1] 刘光耀[1] 

机构地区：[1]四川中物材料有限责任公司,四川绵阳621000

出　　处：《塑料工业》2012年第8期34-36,共3页China Plastics Industry

摘　　要：制备了25%玻纤增强PBT材料,通过添加复配增韧剂及特定加工工艺实现该材料的高强度和低熔体质量流动速率。结果表明,通过两种增韧剂复配及低温弱剪切条件下可实现玻纤增强PBT的高强度和低熔体质量流动速率,实现其重复使用率能达到35%以上。The 25 % glass-fiber reinforced PBT material with high strength and low melt flow rate was pre- pared by blending with toughening agents and special processing technology. Results showed that, through the reaction of two kinds of different toughening agents, the fiber reinforced PBT was with high strength and low melt flow rate in the condition of low temperature and weak shear, the reuse rate could reach at more than 35%.

关 键 词：聚对苯二甲酸丁二醇酯 高性能 熔体质量流动速率 

分 类 号：TB332[一般工业技术—材料科学与工程]