检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李文强[1] 李贺[1] 段磊[1] 刘纯国[2] 隋阵[2]
机构地区:[1]中航工业沈阳飞机工业(集团)有限公司,沈阳110850 [2]吉林大学辊锻研究所,长春130022
出 处:《机械设计与制造》2012年第8期156-158,共3页Machinery Design & Manufacture
摘 要:针对我国飞机生产制造业传统模式中一种零件一套专用工装的问题,采用数字化柔性工装技术的方法,研制了一套柔性工装系统,替代了多个固定工装。对应用于飞机蒙皮等零件的柔性工装系统进行研究,该系统通过电机带动立柱阵列进行三维运动控制,利用可调立柱阵列对蒙皮进行定位,采用真空吸盘对蒙皮进行吸附夹紧,最终实现了飞机蒙皮零件的重建、定位和吸附夹紧。最后用激光跟踪仪对柔性工装系统的运行精度进行检测,结果表明X、Y、Z三个方向的定位精度均在±0.1mm以内、重复定位精度均在±0.05mm以内。Concerning the problems of one set of special tools for one type component in domestic traditional aircraft manufacturing,a flexible tooling system is developed by adopting digital flexible tooling technology to replace many fixed tools.The flexible tools for aircraft skin are studied,which 3D motion could be controlled through column array driven by motor and the skin could be positioned through adjustable column array.After that the skin is sucked and clamped by vacuum chuck,in this case the reconstruct,position and clamp for the aircraft skin is realized.Finally Laser Tracker is applied to inspect the running accuracy of the flexible tool system.The result of experiment indicates that the position accuracy of the system in X,Y,Z axis is ±0.1mm and the repetitive positioning accuracy is within ±0.05mm.
分 类 号:TH16[机械工程—机械制造及自动化] TH122
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28