检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:高光发[1,2,3] 李永池[2,3] 沈玲燕[2,3] 郭扬[2,3]
机构地区:[1]安徽理工大学能源与安全学院,煤矿安全高效开采省部共建教育部重点实验室,安徽淮南232001 [2]中国科学技术大学近代力学系,安徽合肥230027 [3]中国科学院材料力学行为和设计重点实验室,安徽合肥230027
出 处:《高压物理学报》2012年第4期449-454,共6页Chinese Journal of High Pressure Physics
基 金:武器装备探索研究(7131013);国家自然科学基金(50802092);中国博士后科学基金(2011M501394);安徽理工大学博士基金(2011yb007);安徽省自然科学基金(1208085QE86);安徽省高校省级优秀青年人才基金(2012SQRL049ZD)
摘 要:以长杆弹垂直侵彻半无限厚靶板为研究对象,分析了弹体最大侵彻深度与入射速度的关系,研究了弹体入射速度对侵彻最大深度的影响规律。研究表明:靶板的强度和界面效应使弹体在侵彻过程中存在一个临界速度,当入射速度大于临界速度时,弹体的侵彻才能通过开坑阶段进入准稳定阶段,它是造成当入射速度较小时侵彻深度随入射速度的提高而几乎不变或缓慢增加的主要原因;准稳定侵彻过程中弹体速度和侵彻速度基本不变,并且两者存在线性关系,这种关系只与弹体和靶板的材料性能有关,是造成当入射速度较大时侵彻深度随入射速度的提高呈快速线性增大的主要原因。This study is aimed at the relation between maximal penetration depth and impact velocity for a long-rod penetrator vertically penetrating a semi-infinite target.The effects of impact velocity on the maximal penetration depth are obtained by numerical simulation.The results show that the threshold velocity exists in the process of penetrating due to the target strength and the interfacial effect,and the penetration enters into the quasi-steady stage from the dwelling stage only as the impact velocity of the penetrator is beyond this value,which is the key reason why the penetration depth does not change or increases extremely slowly with increasing impact velocity when the impact velocity is small compared with the threshold velocity.The penetrator velocity and penetrating velocity are close to a constant in the quasi-steady stage,and the positive linear relation between them is only related to the strength properties of the penetrator and the target,which is the main reason why the penetration depth linearly increases quickly with the impact velocity increasing when the impact velocity is beyond this threshold velocity.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13