轻质烧结页岩砖砌体螺栓锚固试验  

BOLT ANCHORAGE TEST OF LIGHT-WEIGHT SINTERED SHALE BRICK MASONRY

作　　者：黄榜彪[1] 景嘉骅[2] 朱基珍[2] 汪涛[2] 张向华[2] 

机构地区：[1]广西工学院继续教育学院,广西柳州545006 [2]广西工学院土木建筑工程系,广西柳州545006

出　　处：《建筑技术》2012年第9期817-819,共3页Architecture Technology

基　　金：广西科技厅项目<非承重自保温轻质烧结页岩多孔砖研究开发与产业化>(桂科攻桂科1099058);柳州市科技局项目<轻质烧结页岩)砌块研制与推广>(20091218)

摘　　要：对轻质烧结页岩砖砌体螺栓锚固进行试验,选用4种常用规格螺栓,根据砖体孔形特点及施工随机性,选取4个特定锚固位置进行。试验结果证明,螺栓直径增加,极限抗拉力也相应增加;锚固位置不同,极限抗拉力也不同。建议在后续试验和施工中采用直径10mm型号的螺栓,以满足安全使用要求。Bolts of 4 routine specifications are selected for bolt anchorage test of light-weight sintered shale brick masonry and four certain anchorage positions are tested according to brick hole shape and construction randomness. The test result proves that limit tensile strength will be increased after increase of bolt diameter and varies at different anchorage positions. It is suggested that bolt whose diameter is 10mm shall be adopted during subsequent test and construction to satisfy safety requirements.

关 键 词：轻质烧结页岩砖 砌体 螺栓锚固试验 

分 类 号：TU362[建筑科学—结构工程]