金属油罐容量的检定  

Capacity Calibration Method for Metal Oil Tank

作　　者：王凡喜[1] 傅在善[1] 胡陇得[1] 

机构地区：[1]中国人民解放军济南军区联勤部

出　　处：《油气储运》2000年第7期55-57,共3页Oil & Gas Storage and Transportation

摘　　要：金属油罐的检定通常采用几何测量法,即根据量器的外形尺度和有关位置的测量数据,采用合理的计算方法得到量器的容积表(内部高度与容积的关系)。立式油罐容量的检定与各圈板的内径、内高、底量、罐内附件体积及其起讫点高度和罐的倾斜度的测量数据密切相关;卧式油罐的检定精度受到直圆筒内径、顶板、下尺点内竖直径、倾斜度、钢板厚度及罐体内附件的测量数据的影响。The geometric measurement method is generally used to calibrate the capacity of metal oil tank,that is,on the basis of dimensions of tank to be measured and measurement data obtained in relevent positions of tank and by a reasonable calculation,thus the tank capacity table (relation between the internal height and volume of tank) produces. About vertical tank,the calibration of capacity has a closed relation with the measurement data on internal diameter of each tank plate,internal height,oil volume of tank bottom,accessory volume within the tank and its original height as well as the degree of dip inclination;about horizontal tank, the calibration accuracy will be affected from the internal diameter of straight right cylinder, top plate,total height of dip hatch to tank bottom,degree of dip inclination,thickness of steel plate and measurement data of internal accessories of tank.

关 键 词：油罐 检测方法 金属油罐 容量 

分 类 号：TE972.07[石油与天然气工程—石油机械设备]