冷轧压下量对铁素体区热轧Ti-IF钢冷轧板的再结晶织构特点和深冲性能的影响  

EFFECT OF COLD ROLLING REDUCTION ON RECRY STALLIZATION TEXTURE AND DRAWABILITY OF A COLD ROLLED Ti-IF STEEL SHEET PREVIOUSLY HOT ROLLED IN FERRITE REGION

作　　者：王昭东[1] 李自刚[2] 何晓明[2] 赵昆[2] 张丕军[2] 刘相华[1] 王国栋[1] 

机构地区：[1]东北大学轧制技术及连轧自动化国家重点实验室,沈阳110006 [2]上海宝山钢铁集团公司,上海200941

出　　处：《金属学报》2000年第6期613-617,共5页Acta Metallurgica Sinica

基　　金：国家重点基础研究资助!G1998061509

摘　　要：研究了一种Ti-IF钢在未再结晶铁素体区润滑热轧后、冷轧压下量对IF钢退火后的深冲性能和织构的影响，通过采用非再结晶铁素体区的润滑热轧和随后的冷轧工艺，Ti-IF钢连续退火工艺冷轧板的γ值在73％的冷轧压下星的效果与传统工艺90％冷轧压下量相当，织构分析表明，采用铁素体润滑热轧的热轧板轧制织构中具有较强的｛111｝／／ND组分，当采用73％冷轧压下量和随后的退火工艺可获得最强的｛111｝／／ND再结晶织构，进一步增大冷轧压下量。The influence of cold rolled reduction on the recrystallization texture and drawability of a Ti-IF steel, which was lubriciously hot rolled in unrecrystallized ferriteregion,wasinvestigated.When the hot band previously ferritic rolled, the annealedcoldsheetacquireditshighest γ value by performed 73% cold reduction. However, as the hot bandrolledinausteniteregion, it requiredabout 90% cold reduction in order to achieve the same γ value. Textureanalysis showed that the hot bands of ferriticrolledTi-IFsteelhavestronger{111}NDtexturecomponent. The {111}// ND recrystallization texture was mostly intensified as the hot band cold rolled with 73% reductionand subsequently annealing, and the intensities of {110} // ND were weakened as performed more cold reduction.

关 键 词：TI-IF钢 铁素体区 织构 深冲性能 压下量 冷轧 

分 类 号：TG142.31[一般工业技术—材料科学与工程] TG142.23[金属学及工艺—金属材料]