接枝POE增韧尼龙6的性能  

Property of POE Graft Copolymer/PA6 Blends

作　　者：邵会菊[1] 秦舒浩[1] 张纯[1] 龙雪彬[1] 

机构地区：[1]国家复合改性聚合物材料工程技术研究中心,贵州贵阳550014

出　　处：《塑料》2012年第5期21-23,共3页Plastics

基　　金：贵州省工业攻关项目(黔科合GY字[2010]3005号)

摘　　要：研究了接枝POE增韧PA6及无水氯化锂增强POE接枝甲基丙烯酸环氧丙酯/尼龙6(POE-g-GMA/PA6)复合材料。结果表明:POE接枝甲基丙烯酸环氧丙酯(POE-g-GMA)对PA6具有很好的增韧效果,无水氯化锂在增强POE-g-GMA/PA6复合材料的同时,改变了PA6的结晶度和结晶形态,当氯化锂的添加量为5份时,可以得到无定形的PA6/POE-g-GMA/LiCl复合材料。Toughening and reinforcement of PA6 were investigated by blending with POE graft and LiC1. The results showed that POE-g-GMA/PA6 blends had excellent impact strength, the influence of LiC1 on reinforcement of POE-g-GMA/ PA6 were very obvious, and the erystallinity and crystal of PA6 changed. Amorphous PA6/POE-g-GMA/LiC1 composite was obtained at 5 phr of LiCl.

关 键 词：接枝 POE PA6 无水氯化锂 增韧 

分 类 号：TQ323.6[化学工程—合成树脂塑料工业]