超临界二氧化碳/乙醇复合发泡聚苯乙烯的实验研究  

Experiments Study of Foaming Polystyrene with a Mixture of Supercritical Carbon Dioxide and Ethanol

作　　者：孙娇[1] 何亚东[1] 李庆春[1] 闫宝瑞[1] 信春玲[1] 

机构地区：[1]北京化工大学机电工程学院,北京100029

出　　处：《塑料》2012年第5期100-102,共3页Plastics

基　　金：国家科技支撑计划项目(2011BAD24B01)

摘　　要：采用CO2和乙醇作为复合发泡剂,运用DOE(实验设计)方法研究了发泡温度和发泡压力对PS发泡制品性能的影响,包括发泡剂在PS中的吸附量、发泡制品的表观密度、泡孔直径和泡孔密度。根据DOE结果确定了实验区间内的最佳工艺条件。Using supercritical carbon dioxide and ethanol as a mixed blowing agent, the influence of foaming temperature and pressure on the performance of the polystyrene foams was analyzed by DOE （ experimental design） method, including the adsorption of agent in PS, apparent density,cell diameter and cell density of PS foam product. According to the experimental of DOE results, the optimum technological conditions was determined within the existing experimental interval.

关 键 词：二氧化碳 乙醇 发泡 聚苯乙烯 优化 

分 类 号：TQ325.2[化学工程—合成树脂塑料工业]