基于ADAMS的关节轴承式叠片联轴器的运动分析  

Motion Analysis of the Joint Flexible Laminated Coupling Based on ADAMS

作　　者：申屠留芳[1] 孙成龙[1,2] 孙宇龙[1] 

机构地区：[1]淮海工学院机械工程学院,连云港222005 [2]中国矿业大学机电工程学院,徐州221116

出　　处：《机械设计与制造》2012年第9期213-215,共3页Machinery Design & Manufacture

基　　金：江苏省科技厅基金项目(BK2009636)

摘　　要：关节轴承式叠片联轴器以其承载能力高,可靠性强,具有较高的抗冲击能力,如今已被广泛应用于各个行业中。将利用ADAMS软件对关节轴承式叠片联轴器进行动态仿真分析,模型由Pro/E建立,叠片为柔性体导入ANSYS,建立柔性体文件,再导入ADAMS中,ADAMS能够分析柔性体的动态应力变形情况,在ADAMS环境下完成对整个模型进行运动学和动力学的仿真,并导出相应的分析结果。利用仿真模型和得出的数据即可得知该联轴器的实际运转情况是否良好,大大减少了开发周期和开发成本,为此型关节轴承式叠片联轴器的进一步深入研究做铺垫。The joint flexible laminated membrane coupling has been used widely because of its higher bearing capacity,reliability,and shock resistance.Dynamic simulation of the joint flexible laminated membrane coupling was analyzed based on ADAMS.The model was established by Pro/E,and the MNF files of the flexible body were established by the laminated coupling introduced into ANSYS,then introduced into ADAMS.ADAMS can analyze the deformation conditions of dynamic stress of the flexible body.The simulation model of the kinematics was finished with the ADAMS,and the result was derived.The actual operation of couplings is obtained according to the date of the result,and the development cycle and cost are reduced greatly. The results can offer the theoretical foundation for further study of the joint bearing flexible laminated membrane coupling.

关 键 词：关节叠片联轴器 ADAMS Mech PRO ANSYS 

分 类 号：TH16[机械工程—机械制造及自动化] TH133.4