线性调频雷达前沿复制干扰的能量效率分析与比较  

Energy Efficiency Analysis and Comparison of Front Copy Jamming for Chirp Radar

作　　者：邱杰[1] 

机构地区：[1]海军航空工程学院电子信息工程系,山东烟台264001

出　　处：《电讯技术》2012年第9期1417-1421,共5页Telecommunication Engineering

摘　　要：针对线性调频雷达,对灵巧噪声干扰和前沿复制干扰的基本成分通过匹配滤波器后输出的信号波形进行了分析。以产生相同的干扰效果为能量利用效率比较基准,推导了这两种干扰方式各自所需的干扰信号能量的计算公式;在典型条件下,计算了这两种干扰方式所需干扰信号能量的数值;在一般情况下,对这两种干扰方式的能量利用效率进行了比较。分析结果表明,若前沿波形宽度为雷达发射信号宽度的1/n,则灵巧噪声干扰所需能量仅为前沿复制干扰所需能量的1/n。For chirp radar, the output waveforms of basic components of smart noise jamming and front copy jamming passing through matching filter are analysed. Producing the same jamming effect is used as energy efficiency standard, and then the calculation expressions of needed jamming signal energy for the two jamming forms are given. Under typical conditions, needed jamming signal energies for the two jamming forms are calculated. Under general conditions, the energy efficiencies of the two jamming forms are compared with each other. It is pointed out that if the width of the front waveform is 1/n of the width of the radar transmitted signal, the energy efficiency of front copy jamming is 1/n of that of the smart noise jamming.

关 键 词：线性调频雷达 匹配滤波器 灵巧噪声干扰 前沿复制干扰 干扰能量效率 

分 类 号：TN972[电子电信—信号与信息处理]