KR脱硫用WG-3Y搅拌器水模试验研究  

Research on WG-3Y stirrer for KR desulfurization with water model experiments

作　　者：罗安智[1] 欧阳德刚[1] 李明晖[1] 朱善合[1] 蒋扬虎[1] 王海青[1] 

机构地区：[1]武汉钢铁(集团)公司研究院,湖北武汉430080

出　　处：《钢铁研究》2012年第5期31-34,共4页Research on Iron and Steel

摘　　要：采用水模试验方法,对常规四叶搅拌器和不同叶片结构的WG-3Y搅拌器的搅拌混合特性进行了研究,试验结果表明,本试验条件下,模型C结构WG-3Y搅拌器的搅拌混合特性最优,其卷吸深度比常规四叶搅拌器增大30%～100%。The mixing performance of ordinary four-blade stirrer and new type WG-3Y stirrers with different blade structure were investigated by means of water model experiments. The results show that WG-3Y stirrer with mode C is the best in mixing performance compared with other stirrers. In the experimental conditions, the immixture depth of WG-3Y stirrer with mode C is higher than that of ordinary fourblade stirrer by 30 G to 100%.

关 键 词：水模实验 KR搅拌脱硫 动力学条件 卷吸深度 

分 类 号：TF713.3[冶金工程—钢铁冶金]