Ultrasonic Nondestructive Testing and Evaluating System for the Brazing Quality of a Guide Ring  

作　　者：高双胜 迟大钊 刚铁 

机构地区：[1]School of Material Science and Engineering,Shenyang Aerospace University [2]State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology

出　　处：《Journal of Shanghai Jiaotong university(Science)》2012年第5期527-530,共4页上海交通大学学报（英文版）

基　　金：the Fund of the State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology(No.welding 10-013)

摘　　要：The important status of guide ring in large power plants and its manufacturing methods were introduced. The advantages of manufacturing methods including welding and electrolysis were discussed.In order to ensure the brazing quality of the guide ring,ultrasonic nondestructive testing(UNDT) method was used in this study.According to the features of the defects that may show up during brazing,the feasibility and reliability of UNDT were proved in theory.Based on the theory,an ultrasonic C-scan imaging test method was developed using a water immersion focusing probe.According to the features of the inspected images,the defects were segmented using a morphology image processing based method.The defects can be localized and sized by employing the algorithm of area reconstruction.At last,the combination ratio of brazing interface can be calculated and the brazing quality of the guide ring can be evaluated.The important status of guide ring in large power plants and its manufacturing methods were intro- duced. The advantages of manufacturing methods including welding and electrolysis were discussed. In order to ensure the brazing quality of the guide ring, ultrasonic nondestructive testing （UNDT） method was used in this study. According to the features of the defects that may show up during brazing, the feasibility and reliability of UNDT were proved in theory. Based on the theory, an ultrasonic C-scan imaging test method was developed using a water immersion focusing probe. According to the features of the inspected images, the defects were segmented using a morphology image processing based method. The defects can be localized and sized by employing the algorithm of area reconstruction. At last, the combination ratio of brazing interface can be calculated and the brazing quality of the guide ring can be evaluated.

关 键 词：guide ring BRAZE ultrasonic testing image processing 

分 类 号：TG118.28[金属学及工艺—物理冶金]