单织轴喷气织机生产宽幅织物的实践  

Practice of Producing Broad Width Fabric on Single Loom Beam Air Jet Loom

作　　者：王美红[1] 孙鉴丽 

机构地区：[1]江苏盐城纺织职业技术学院 [2]江苏悦达家纺有限公司

出　　处：《棉纺织技术》2012年第10期60-62,共3页Cotton Textile Technology

摘　　要：探讨使用单织轴喷气织机生产宽幅织物的关键技术措施。通过分析双织轴喷气织机生产宽幅织物时存在的问题,认为:采用单织轴喷气织机生产宽幅织物时,应选用配套的宽幅整经机与宽幅浆纱机,各道工序合理配置张力等工艺参数;织造时加强边纱的控制,选择适宜的温湿度条件,最终使得织机效率达到92%,满足了生产要求。Key technology measures of producing broad width fabric on single loom beam air jet loom were discussed. Problems existed in producing broad width fabric on two-beam air jet loom were analyzed. It is considered that supporting broad width warping machine and sizing machine should be selected in producing broad width fabric on single loom beam air jet loom. Processing parameter in each process should be selected rationally such as tension. Side yarn should be controlled well in weaving, temperature ＆ humidity should be selected properly,finally loom efficiency can be reach above 92% ,production demands can be reached.

关 键 词：单织轴 喷气织机 宽幅织物 整经张力 温湿度 织机效率 

分 类 号：TS105.411[轻工技术与工程—纺织工程]