检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]湖南大学汽车车身先进设计制造国家重点实验室 [2]湖南大学机械与运载工程学院 [3]湖南大学材料科学与工程学院,长沙410082
出 处:《机械工程材料》2012年第10期81-85,共5页Materials For Mechanical Engineering
基 金:高等学校博士学科点专项科研基金资助项目(20090161110027);湖南省杰出青年基金资助项目(09JJ1007);重庆市科技攻关计划项目(CSTC,2007AA4008);湖南大学汽车车身先进设计制造国家重点实验室自主课题项目(61075005)
摘 要:先将铝镁硅合金型材在180℃下分别进行30,150,540min的时效处理,然后采用WAW-E600型试验机对其进行准静态下的压缩试验,研究其变形模式与吸能性能。结果表明:随时效时间的延长,铝镁硅合金型材的压缩变形模式由金刚石模式逐渐转变为手风琴模式,时效540min后型材的吸能性能较时效30min的提高了78.1%。The A1-Mg-Si profiles were aged at 180 ℃for 30 rain, 150 rain and 540 rain, respectively and then compressed with WAW-E600 test mechine in quasi static state to study the deformation modes and energy absorption. The results show that the deformation mode of the ALMg-Si profiles changed from diamond mode to concertina mode with the increase of aging time. Comparing with the profile aged for 30 rain, the energy absorption of the profile aged for 540 min was increased by 78. 1%.
关 键 词:铝镁硅合金型材 时效 准静态压缩 变形模式 吸能性能
分 类 号:TB31[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222