正交试验法研究铣磨球面表面粗糙度的影响因素  

Factors Affecting Grinding Spherical Roughness Based On Orthogonal Test

作　　者：徐海华[1,2] 徐放 赵逸群 谢启明 张宇[1] 

机构地区：[1]昆明理工大学CIMS应用研究中心,云南昆明650093 [2]云南北方驰宏光电有限公司,云南昆明650217

出　　处：《云光技术》2012年第1期24-30,共7页

摘　　要：光学透镜的高效精密铣磨加工是透镜抛光的前提和基础，对透镜铣磨加工中影响其表面粗糙度的因素进行研究，通过在OptoTech SM50CNC．TC数控机床上对球面硅透镜进行铣磨试验，并采用正交试验的方法研究各种因素对硅透镜表面粗糙度的影响，找出各铣磨参数对表面粗糙的影响规律，确定最优铣磨参数匹配。High-precision milling of the optical lens is the prerequisite and basis for the polishing of lens.the factors affecting the lens surface roughness was studied in this paper. The Grinding tests of the spherical silicon lens were performed on OptoTech SM50 CNC-TC. The multiple factors affecting spherical silicon lens surface roughness were researched via the method of orthogonal test. The influence regularities of various factors were found out and the optimal grinding parameters match was determined.

关 键 词：正交试验 球面硅透镜 数控粗磨 表面粗糙度 

分 类 号：TG84[金属学及工艺—公差测量技术]