检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黎正科[1] 周志雄[1] 黑大全[1] 宋铁军[1]
机构地区:[1]湖南大学机械与运载工程学院,湖南长沙410082
出 处:《广西大学学报(自然科学版)》2012年第5期959-964,共6页Journal of Guangxi University(Natural Science Edition)
基 金:国家科技重大专项资助项目(2009ZX04012-021);湖南省研究生科研创新资助项目(CX2010B129)
摘 要:为减小深孔麻花钻在切削过程中的刀具损伤,延长其使用寿命,选定其几何参数为优化对象,以切削过程中钻削力达到最小为优化目标,基于所开发的深孔麻花钻三维参数化设计模块,结合有限元仿真以及多元正交非线性回归试验设计等方法,建立钻削力数学模型,并运用遗传算法实现优化。结果显示,当深孔麻花钻的第一后角、钻尖顶角以及螺旋角分别为5.24°、141.56°、64.99°时,其钻削力最小。深孔麻花钻三维参数化设计模块应用数据库技术,解决了传统设计过程中效率低、工作量大以及精度较差等问题。In order to design a new kind lected as the optimization objects and the of twist deep hole drill, the geometric parameters are se drilling force at the minimum is targeted for optimization. Based on the 3 D parametric design module of twist deep hole drill and combined with the finite ele- ment simulation and multivariate orthogonal nonlinear regression test design method, the mathemati- cal model of the drilling force was established and optimization was rithm. The results indicated that drilling force reached the minimum 5.24° spire angle is 141.56° and helix angle is 64. 99°. The 3D database technology could overcome problems such as low efficiency, racy encountered in traditional design process. reached by using genetic algo- when the first posterior horn is parametric design module with heavy workload and poor accu
分 类 号:TG714[金属学及工艺—刀具与模具]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38